How To Fix Curtain Rails In a Pelmet Box
Posted: Monday, June 15, 2009
by Andrew Karundu
http://www.karundu.com
Windows have pelmet boxes already in place with curtain rails provided after construction by the builder. However the curtains an owner has may not be compatible with hooks provided. Generally this consist of rails and guiders fixed within the box. This are mostly made of timber and hang above the window level. For bay windows extending outwards the building, they are fixed either into the recess of the window, or straight across the abutting walls.
Take the curtain rails for the pelmet box and measure out the length of each leaf of curtain. If the desired curtain is one measure the pelmet size. For two curtains the rails are measured half the length of the box and an additional minimum ten inches for overlaps. Ensure that each rail is cobbled on one end to achieve the desired overlap. The straight end is fixed to end of pelmet, while cobbled part fixed at the center of the box.
Lift the curtain rail and fix the stopper of gliders first before screwing on the pelmet box. Screw each rail hunger firmly into the curtain box. Since most rails are aluminum, ensure that no sharp cut edges are left without filing. For the cobbled parts add stoppers for gliders an d screw firmly. Pick the curtain and hook desired places. Start from the stopped end. Glide the rollers towards the center with the curtains in place to overlap.
Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS .
This Article has been viewed 772 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.